Bilora bežični okidač za bljeskalice FB1-C3 2.4 GHz flash trigger Wireless Remote Control C3 Canon (komplet odašiljač + prijemnik) EOS 6D, 6D II, 7D, 7D II, 5D III, 5D IV, 50D, 1D, 1Dx

ZNAČAJKE:

Use of a remote release
The camera is mounted on a tripod and the shutter is released without touching the camera. This has the following advantages:

No impact is transmitted to the camera. This makes recording without camera shake possible even with long-term exposure.
With a radio remote control the distance can be up to 100 m.
A freely selectable advance time gives the photographer the time to stand up, even if the distance from the subject to the camera is longer.
Monitoring of production processes
A timer function allows the user to take pictures of a special kind.
Documentation of slow motion sequences. Examples: The emergence of a flower can be recorded in a timed manner. The path of the sun or the moon over the firmament can be reduced to a few minutes.
FB1:
The FB1 is a radio remote release, which operates in the interference-free 2.4 GHz band.
It allows

The wireless triggering of cameras over max. 100m Distance (no walls)
The wireless synchronization of plug-in flash units (standard foot)
The wireless synchronization of studio flash units (3.5 or 6.3mm jack)
16 channels can be selected and the receiver also serves as a cable release.
Danger:

The triggering camera and the remotely controlled plug-in flash must be system-compatible with Canon cameras or have a middle contact.
For Nikon cameras, the plug-in flash unit must only have a middle contact.
A Studioblitz device must have a 6.3mm or 3.5mm jack socket.
Suitable for:
Canon EOS Digital SLR / EOS 1D, 1D Mark II / 1D Mark II N / 1D Mark III / 1Ds / 1Ds Mark II / 1Ds Mark III
EOS 7D, 5D, 5D Mark II / 10D / 20D / 30D / 40D / 50D / D30 / D60 / D2000
Canon EOS film SLR EOS 1V 1VHS 3
KODAK DSC-530

As a camera-radio remote release with two-stage release button:
The autofocus of the camera is activated at the first pressure point, and the second is triggered.
LED indicators inform the transmitter and receiver of the function.
Under optimal conditions the trigger has a range of up to 100m.
Long-term exposures and serial images are possible.
For this purpose, appropriate settings must be made on the camera.
In cameras where the video function can be controlled by the photo release button,
You can also start and stop video recording with this trigger.

As a flash radio remote synchronizer for plug-in or studio slitters.
Studioblitz devices can be connected with a 3.5 mm or 6.3 mm jack plug.
It also allows unleashed flashing from a larger distance and works more smoothly
In the 2.4 GHz range as comparable devices in the 433MHz range.

The receiver has a flash shoe for inserting a system-compatible flash-on flash or
Lightning bolt with center contact and a lightning foot with 1 "tripod thread for mounting on a flashing or tripod.
The transmitter has a contact arrangement like original flashes for the malfunctioning function on the sending camera.
It is also possible to synchronize a plug-in flash and a stud slot at the same time.

SPECIFIKACIJE:

Cable length: approx. 60 cm flash sync cable, camera connection approx. 20 cm.
Dimensions Transmitter: approx. 4 x 5 x 3cm
Receiver: approx. 4 x 7 x 3cm
Total weight (with cable): approx. 126g
Type: 2.4GHz radio remote control
Range: about 100m
Synchronization time: min. 1 / 200sec.
Channels: 16 (adjustable to transmitter and receiver)
Power supply: 2x CR2 3V (enough for up to 20.000 releases)
Max. Ignition voltage: 6V

Delivery:
Transmitter, receiver, flash connection cable with 6.3mm jack / 3.5mm jack adapter,
Synchro cable, camera connection cable. German / English manual

Note: The FB-1 wireless trigger does not transmit TTL data,
So all settings on the flash must be done manually.