DJI Inspire 1 V2.1 Quadcopter with single remote 4K Camera and 3-Axis Gimbal V2.0

PRODUCT HIGHLIGHTS

Ready-to-fly aerial system
Capture 4K Video and 12MP Stills
3-Axis Gimbal Stabilizes Camera
Up to 1.2 Mile Radio Range
GPS-Based Flight Control System
Vision Positioning for Indoor Flying
Live 720p HD Monitoring with Lightbridge
Thrust-Boosted Motors / New Propellers
Retractable Carbon Fiber Arms
Unobstructed 360° Shooting
Dual Transmitter Operation Supported



Capture 4K video and take 12-megapixel still photos from the air with the DJI Inspire 1 v2.1 Quadcopter with Integrated Camera and 3-Axis Gimbal. Forgoing the fixed landing gear design found on many earlier quadcopters, the Inspire 1 features a retractable arm system whereby the underside of each prop motor has a foot to act as a landing pod when the arms are lowered. In-flight, the arms lift up to provide the camera an unobstructed 360-degree view. A 3-axis gimbal keeps shots steady and the camera pointed the same direction as the quadcopter banks and turns. The camera records internally to microSDHC/SDXC memory cards (16GB included) and can also beam a live 720p feed to a mobile device running the DJI Lightbridge app or a monitor or FPV glasses with an HDMI input. One transmitter (radio controller) is included and a second can be added so that one operator can pilot and another can pan and tilt the camera.

As with many other multi-rotor systems, the Inspire 1 relies on a GPS-based stabilization system that – thanks to spatial awareness – is able to hold a position even when experiencing wind interference, can compensate for overzealous pilot inputs to help avoid stalling, automatically brings the aircraft home in the event of signal loss or at the press of a button, and makes possible a number of semi-automated flight modes that can be enabled through the app. There is also an "indoor" mode which relies on Vision Positioning technology – essentially a special camera – provide stability indoors or in other contexts where GPS is unavailable (Note: certain features will be unavailable in indoor mode).

This bundle includes the Inspire 1 along with gimbal and camera, a transmitter, a flight battery, a battery charger, and a tablet holder that mounts on the transmitter. To store and transport the aircraft, a case with fitted cut-outs is included. It holds the Inspire with rotors detached, one or two transmitters, props, spare flight batteries, and more.

What's New for v2?
Zenmuse X5/X5R Compatibility
In addition to the included Zenmuse X3, this version of the Inspire 1 also works with the Zenmuse X5 and X5R gimbal cameras (available separately)
New Propulsion System
With the new 3510H motor, the thrust sees a boost. This yields an increase in the motor velocity constant from 350 Kv to 420 Kv. In practice, this translates into better control, especially when using a Zenmuse X5 series gimbal camera
Redesigned Propellers
To go with the 3510H motors, new propellers and a new propeller mounting system have been introduced. They employ an updated mounting system, designed to make attaching and removing the propellers easier than ever before
What Ready-to-Fly Means
This Inspire 1 bundle comes ready-to-fly (RTF). This means a pre-bound transmitter (radio controller) is included and that no major assembly is required – in particular, no assembly that requires soldering. It is important – as with any multi-rotor – to follow the user guide to ensure proper calibration before embarking on your first flight
Integrated 4K Camera
4K and HD Video Capture
The Inspire 1 Camera shoots 4K video at 24p and 30p, and it can shoot HD video frame rates from 24p to 60p. It features a 1/2.3" CMOS sensor with a 94-degree field of view (FOV) lens. This field of view works out to about 20mm in 35mm equivalent, which gives you a wide but not extremely wide or fisheye framing – while not as immersive as a fisheye, this FOV features less distortion and gives the subject more emphasis
3-Axis Gimbal
The camera is mounted via an integrated 3-axis gimbal which uses brushless servo motors to keep the shot stable and the horizon level. The camera pans a full 360-degrees so that no matter which way the quadcopter turns, the camera can remain locked on the subject. Manual panning and tilting can be affected using controls on the transmitter
Live HD View
A real-time feed from the Inspire 1 Camera can be displayed in 720p HD on a mobile device or HDMI monitor, making this it a great choice for FPV (first-person view) flying as well as enabling videographers and photographers to monitor framing from the ground. This is made possible by the inclusion of the DJI Lightbridge system within the flight electronics, which features a range of up to 1.2 miles

For connecting an FPV monitor or glasses there is an HDMI port on the transmitter. Plus there is a USB port to keep you mobile device's battery topped up. And included mount allows you to attach a smartphone or tablet directly to the transmitter
Modular Gimbal and Camera
Inspire 1's gimbal and camera can be removed from the aircraft for safe transport and future upgrades
Airframe Design
Retractable Carbon Fiber Arms
The prop arms rest in a lowered position when the Inspire is on the ground, acting as landing gear. Once in the air, they can be retracted to give the camera unobstructed views across 360-degrees. Carbon fiber is used in the construction because of its high strength to weight ratio
Aerodynamic Design
Not only does it give the Inspire 1 a sleek look, the aerodynamic airframe helps reduce resistance for better performance and increased battery life
Flight Control System
Fly Indoors and Without GPS
DJI's Optical Flow technology uses a specially designed camera as well as sonic waves to provide the same stability function indoors as GPS does outdoors. This technology allows the Inspire to hold its location, stop when the controls are released, and quickly respond to pilot commands even when GPS is unavailable
App-Based Control Software
Everything from manual camera controls to flight telemetry – even auto takeoff and landing – can be accessed via the Inspire 1 Mobile app. It is also possible to create autopilot courses using waypoints, just as you would on the DJI iPad Ground Station System

Note: The tablet must be connected to the transmitter via USB, and to use the waypoint map an Internet connection is required
Manual Mode
Change all of your camera settings, including ISO, White Balance, Exposure, and more on the fly ensuring every shot looks exactly the way you want
Live Map and Radar
See precisely where your Inspire 1 is at all times on the live map. The map can be enlarged when needed, and shows your most recent flight path
Dynamic Home Point
When GPS signal is available on the transmitter (remote control), the Home Point automatically refreshes. This becomes useful while traveling in a car or on a boat allowing the return-to-home point to move where the operator goes. Multiple configurations are available via the Dynamic Home Point function
Auto-Takeoff and Landing
Takeoff and landing are available with just a tap. Tap once to takeoff and your Inspire 1 will hover and transform, ready to start filming. Then tap again to make it transform into landing mode and auto land
Transmitter Customization
Put yourself in charge by tailoring the Inspire 1's controls to your personal needs. This way, your Inspire 1 moves and responds in ways you're most comfortable with
Transmitter (Radio Controller)
Take control of your Inspire 1 in the air with a dedicated transmitter (radio controller) designed specifically for it. Operating on 2.4 GHz, it features dedicated buttons for photo and video capture, a gimbal control dial, and more. It includes an integrated 6000mAh rechargeable battery
Use Two Transmitters
For an even greater level of precision, use a second transmitter and fly with a friend. With two people controlling the same quadcopter, one person pilots the flight path while the other aims the gimbal and camera. Each user can have their own screen to see exactly what is being shot in real-time
Smart Battery System
Smart Power Management
The flight battery constantly supplies the flight computer with remaining voltage. Using special algorithms the computer supplies the pilot with estimates of remaining flying distance and time to return home
Automated Charging
The battery tracks the voltage of each cell, the total number of charges and discharges, and the overall health and battery status



SPECIFIKACIJE:

Performance
Hovering Accuracy (GPS Mode) Vertical: 1.6' / 0.5 m
Horizontal: 8.2' / 2.5 m
Maximum Angular Velocity Pitch: 300°/s
Yaw: 150°/s
Maximum Tilt Angle 35°/s
Maximum Ascent/Descent Speed Ascent: 16.4 fps / 5 m/s
Descent: 13.1 fps / 4 m/s
Maximum Speed 72.2 fps / 22 m/s (Attitude mode; no wind)
Maximum Flight Altitude 14,764' / 4,500 m
Maximum Wind Speed Resistance 32.8 fps / 10 m/s
Maximum Flight Time With Zenmuse X3: Up to 18 minutes
With Zenmuse X5/X5R: Up to 15 minutes
Camera
Model Name: X3
Designation: FC350
Sensor Sony EXMOR 1/2.3" CMOS
Resolution 12.0 MP
Lens Field of View: 94°
Focal Length (35 mm Equivalent): 20 mm
Aperture: f/2.8
Design: 9 elements in 9 groups; aspherical lens element
Filters: Anti-distortion filter; UV filter
Video Recording UHD (4K):
4096 x 2160: 24p, 25p
3840 x 2160: 24p, 25p, 30p

FHD (1080p):
1920 x 1080: 24p, 25p, 30p, 48p, 50p, 60p

HD (720p):
1280 x 720: 24p, 25p, 30p, 48p, 50p, 60p

Maximum Bitrate: 60 Mbp/s
File Format Photo: JPEG, DNG
Video: MP4 in a .MOV wrapper (MPEG-4 AVC/H.264)
Recording Media Type: microSD/SDHC/SDXC up to 64 GB
Speed: Class 10 or faster
Format: FAT32/exFAT
Photography Modes Single shot
Burst: 3, 5, 7 frames per second (AEB: 3/5 frames per second; 0.7 EV bias)
Time-lapse
Operating Temperature 32 to 104°F / 0 to 40°C
Gimbal
Model Zenmuse X3
Number of Axes 3-axis
Control Accuracy ±0.03°
Maximum Controlled Rotation Speed Pitch: 120°/s
Pan: 180°/s
Controlled Rotation Range Pitch: -90° to +30°
Pan: ±330°
Angular Vibration Range ±0.03°
Output Power Static: 9 W
In Motion: 11 W
Operational Current Static: 750 mA
In Motion: 900 mA
Mounting Detachable
Flight Controller
Indoor Hovering Enabled by default
Optical Sensor (Optical Flow) Frequency: 50 Hz
Velocity Range: Below 26.2 fps / 8 m/s (6.6' / 2 m above the ground)
Altitude Range: 2 to 196.8" / 5 to 500 cm

Operating Environment: Rich pattern surface with adequate lighting (> 15 lux)
Operating Range: 0 to 8.2' / 0 to 2.5 m
Motor
Model DJI 3510H
Motor Velocity Constant 420 Kv
Maximum Thrust 4.8 lb / 2200 g at 25 V and sea level
Weight 3.8 oz / 107 g
Propeller
Model DJI 1345
Transmitter
Operating Frequency Transmitter to Transmitter: 5.728 to 5.850 GHz
Transmitter to Aircraft: 2.400 to 2.483 GHz
Range Line-of-Sight: Up to 6561.7' / 2000 m
Receive Sensitivity 1% PER:-93 dBm
EIRP 10 dBm at 900 MHz; 8 dBm at 5.8 GHz; 20 dBm at 2.4 GHz
Connectivity 1 x USB type A female (for connecting mobile device)
1 x Micro-USB for firmware updates
1 x Mini-HDMI video output for FPV
1 x CAN-Bus port (for future accessory)
Dual User Capability Host-and-slave connection
Mobile Device Holder Tablet or smartphone
Output Power 9 W
Power Requirements 1.2 A at 7.4 VDC
Battery 6S LiPo; 6000 mAh
Charging Temperature Less than 3 Months: -4 to 113°F / -20 to 45°C
More than Three Months: 72 to 82°F / 22 to 28°C
Storage Temperature Less than 3 Months: -4 to 113°F / -20 to 45°C
More than 3 Months: 72 to 82°F / 22 to 28°C
Mobile Device Holder Device Width: 2 to 6.7" / 5 to 17 cm
Flight Battery
Model TB47
Voltage 6S LiPo; 22.2 VDC
Capacity 4500 mAh / 99.9 Wh
Maximum Charging Power 180 W
Operating Temperature -4 to 104°F / -20 to 40°C
Storage Temperature -4 to 113°F / -20 to 45°C
72 to 82°F / 22 to 28°C
Charging Temperature 32 to 104°F / 0 to 40°C
Weight 1.3 lb / 570 g
Charger
Model A14-100P1A
Voltage 26.3 VDC
Output Power 100 W
Mobile App
System Requirements iOS: 7.1 or later
Android: 4.1.2 or later

Note: The device must be connected to a transmitter via USB (wireless linking is not supporting). Additionally, waypoint navigation requires an active Internet connection in order to load the maps
General
Model Aircraft: T600
Operating Temperature 14 to 104°F / -10 to 40°C
Dimensions Diagonal Distance:
Landing Gear Lowered: 22" / 559 mm
Landing Gear Raised: 22.9" / 581 mm

Overall Dimensions:
17.2 x 17.8 x 11.9" / 438 x 451 x 301 mm

Transit Case:
Exterior: 22.4 x 19.7 x 10.6" / 57 x 50 x 27 cm
Weight With Battery: 6.5 lb / 2.9 kg

EAN: 6958265115899



UKLJUČUJE:

DJI Inspire 1 v2.1 Quadcopter with 4K Camera and 3-Axis Gimbal
Transmitter for Inspire 1 Quadcopter
Zenmuse X3 Gimbal and Camera Unit (Inspire 1 Variant)
Mobile Device Holder
TB47B Intelligent Flight Battery for Inspire 1 (99.9Wh)
ND Filter
Flight Battery Charger
Charging Cable for Transmitter
Power Cord
4 x Spare Prop CW/CCW Pairs
16GB microSD Memory
Suitcase for Inspire 1 Quadcopter

Jamstvo:
12 mjeseci ili 200 sati rada Aircraft (whichever Comes First; Excluding Propellers, Gimbal, Camera, and Battery)
12 mjeseci Gimbal/Camera
6 mjeseci ili 200 sati rada Battery (whichever Comes First)