DJI Zenmuse H4-3D gimbal za Phantom 2 za GoPro Hero kamere
PRODUCT HIGHLIGHTS
Keeps Aerial Shots Level and Stabilized
3-Axis Brushless Gimbal
Tilt Range of -130° to +45°
Independent IMU Provides Motion Data
Plug-and-Play with Phantom 2
Optional GCU for Other Aircraft
Updatable Firmware
Weighs 0.8 Ounces
Power From Flight Battery
Specifically Balanced for HERO4 Black
Odgovara na:
Gopro Hero1
Gopro Hero3
Gopro Hero3+
Gopro Hero4
White / Silver / Black Edition
One of the biggest obstacles to capturing polished video from a multi-rotor RC aircraft is camera shake. Wind turbulence buffets the aircraft, and even on a still day there is always rotor-incurred vibration to contend with. If you are recording with the GoPro HERO4 Black and using a multi-rotor with a DJI flight controller installed, the Zenmuse H4-3D Gimbal is the solution. This 3-axis, brushless motor gimbal corrects for pitch and roll, and allows for tilting of -130° to +45°. It can power from the flight battery, and for Phantom 2 installations uses the aircraft's integrated GCU. An optional GCU is available separately for other models. The H4-3D is compatible with the A2, WooKong-M, Naza-M, Naza-M V2, and Phantom 2 flight control systems.
Pre-Calibrated
The H4-3D arrives pre-calibrated for the GoPro HERO4 Black camera - once installed, no additional configuration steps are required
Note: The H4-3D is specifically balanced for the GoPro HERO4 Black -- it will not work with the HERO3, HERO3+, or HERO4 Silver
Aircraft Compatibility
The H4-3D works out-of-the-box with the Phantom 2 as the Phantom 2 features a built-in gimbal control unit (GCU). In addition, it can be used with many other aircraft when combined with an independent GCU module (available separately). The gimbal can be used with multi-rotors that have the following flight control systems:
A2
WooKong-M
NAZA-M
NAZA-M V2
Note: The NAZA-M LITE is not supported. Additionally, the NAZA-M V2 PMU must be used if using a NAZA-M V1 flight controller
Independent IMU
The inertial measurement unit (IMU) is essential for the gimbal to be able to stabilize the camera. It senses motion, using this data to instruct the servo motors which direction to move. For maximum precision, this data gets updated every millisecond
Firmware Updatable
As software updates get released, DJI will make them available to end users in the form of free firmware updates. Simply connect the H4-3D to a computer running the assistant software
Optional GCU Module
For use in aircraft that - unlike the Phantom 2 - do not have integrated GCUs, an optional GCU (gimbal control unit) is available separately
Da bi napisali svoje mišljenje o ovom proizvodu potrebno je imati aktivan račun na našim stranicama!
Možete se registrirati kao novi korisnik ili prijaviti kao već postojeći.
Trenutno nema komentara za ovaj proizvod. Budite prvi koji će komentirati!