Syrp Genie Motion Control Device for Time Lapse and real-time video (0030-0001)

ZNAČAJKE:

The Genie Motion Control Time Lapse Device from Syrp is your key to the creative world of time lapse photography or real time video. The 4" cube takes up very little space in your bag and at only 3.3 lb it's easy to make it part of your standard rig.
The Genie, which allows both panning and linear motion control, attaches to standard gear such as dollies, sliders, jib arms and tripods. Simply attach the panning accessory to your tripod or support and mount your optional camera and ball head to the 3/8"-16 stud atop the Genie. The weight of your equipment is rarely a concern since it supports up to 44 lb. An illuminated bubble level is built in to help in setting up for panoramas. The Genie has factory presets such as Stars, People or Clouds but you can enter an unlimited amount of user presets into the Genie's memory for custom work. At maximum panning speed a 360° pan takes 5 seconds, while 39" of linear movement takes 23 seconds.
Linear time lapse can be done on a rail or on a linear support system of your own making. While the Genie comes with 9.85' of rope to pull it across the rail, the movement of your time lapse is only limited by the length of your rope. Kevlar-cored rope with lengths of 328', 164' or 32.8' are available for separate purchase. The Genie has been tested successfully on a homemade 60' dual cable stretched over a lake.
Inputs include both USB for firmware and a sensor input. The free firmware upgrade enables bulb ramp-in and ramp-out functions and HDR (High Dynamic Range). Ramping is the process of modifying exposure settings on a camera in order to maintain a desired exposure value while the camera is in Bulb mode. This is especially valuable for transitional day into night, or night into day time lapses.
The sensor input accepts a motion, light, sound or other type of sensor to start your program in response to specific stimuli. The Genie ships with both panning and sliding bases, two slider mounts, 9.85' of rope and a multi-voltage charger for its built-in battery. A three-hour charge gives you about 12 hours of run time, depend on the weight of your camera. The Genie is compatible with approximately 130 cameras from nine major brands. A camera cable must be purchased separately.
Dual Motion
Panning and linear motion control with one device
Versatile
Attaches to any existing film equipment i.e. Dolly, Slider, Jib Arm etc.
Sensor Input
Auto start function through a timer or sensor or both. Sensor input allows for attachment of a motion sensor, light sensor, sound sensor and more
Preview
Preview function allows for revision of recording movement prior to recording
Pre-Sets
Factory pre-sets allow for instant shooting straight out of the box or storable user-programmable panning and tracking pre-sets
Auto Start and Power Saving
Auto Start enables the user to program camera movements to return to "home" and repeat again or continuously run the same movement. It also enables the user to setup time-lapse or camera movement to start on a delay timer. Auto Power Off shuts down the Genie when it's unused for 1 hour to save battery power
Leveling
Bubble level with light
Ramping Firmware
Bulb ramping is the process of modifying exposure settings on a camera in order to maintain a desired exposure value while the camera is in Bulb mode. A free firmware upgrade allows ramp-in, ramp-out function and HDR.
Compatibility
If your camera is not listed below, please contact Syrp to check compatibility.

Canon
7D, 70D, 60D, 50D, 40D, 30D, 5D, 20D, 10D, 5D Mark III, 5D Mark II, 1D X, 1D C, 1D Mark IV, EOS M, EOS M2
1D (s) Mark III, 1D (s) Mark II (N), 1200D (T5), 1100D (T3), 1000D (XS), 100D (SL1), 700D (T5i), 650D (T4i)
600D (T3i), 550D (T2i), 500D (T1i),450D (XSi), 400D (XTi), 350D (XT), 300D, 300V, 300, 60Da
50E, 50, 33, 30, 3000, Canon Powershot G1X Mark II, G1X, G10, G11, G12, G15
Nikon
D810, D800E, D800, D700, D600, D300S, D300, D200, D4, D4S, D3S, D3X, D3, D2, D1X, D1, D1H, D2H, D2HS, D2X, D2XS, D80, D70s, D7100, D7000, D5300, D5200,
D5100, D5000, D3200, D3100, D3000, D90, D610, 1 AW1, 1 J1, 1 J2, 1 J3, 1 J4, 1 S1, 1 S2, 1 V1, 1 V2, 1 V3
Sony
A99, A 77 Mark II, A77V, A900, A850, A700, A580, A550, A500, A450, A350, A300, A200, A100, A77, A65, A58, A55, A35, A33, NEX 5, NEX 5N NEX 5T, NEX 7, NEX 6, Sony a7, a7R, a7s, a6000
Pentax
645D, ist D, ist DL, ist DL2, ist DS, ist DS2, K-30, K-5, K-5 II, K-5 IIs, K3, K-50, K-500, K-7, K-m, K10 Grand Prix, K100D, K100D Super, K10D, K110D, K200D, K20D, MZ-6, MZ-L, ZX-L
Panasonic
FT 2, FZ1000, FZ100, FZ15, FZ150, FZ20, FZ200, FZ30, FZ50, G1, G10, G2, G3, GH4, G5, G6, GF1, GH1, GH2, GH3, GX1, GX7 L1, L10, LC1, TS2
Olympus
E-100 RS, E-30, E-400, E-410, E-420, E-450, E-510, E-520, E-600, E-620, Evolt E-410, Evolt E-510, OM-D E-M1, OM-D E-M10, OM-D E-M5, PEN E-P1, PEN E-P2, PEN E-P3, PEN E-P5, PEN E-PL2, PEN E-PL3, PEN E-PL5, PEN E-PM1, PEN E-PM2, SP-550, SP-560, SP-570, XZ-1, XZ-2, XZ-2 iHS
Fujifilm
S5 Pro, S3 Pro, X-E1
Kodak
DSC-530, DCS Pro 14n
Contax
N Digital NX, N1, 645
Samsung
GX 1L, GX 1S, GX-10, GX-20, NX-10, NX-100, NX-11, NX-5
Hasselblad
H, H3D, H4D-200MS, H4D-31, H4D-40, H4D-50, H4D-50MS, H4D-60
Sigma
SD1, SD1 Merrill, SD15
Minolta
DiMAGE 5, DiMAGE 7, DiMAGE 7Hi, DiMAGE 7i, DiMAGE A1, DiMAGE A2, DiMAGE A200, Dynax 3, Dynax 4, Dynax 5000, Dynax 500si, Dynax 505si, Dynax 5D, Dynax 7, Dynax 7000, Dynax 7D, Dynax 9, Dynax 9000, Dynax Sweets, Maxxum 3, Maxxum 4, Maxxum 5000, Maxxum 500s, Maxxum 505si, Maxxum 5D, Maxxum 600si, Maxxum 7, Maxxum 7000, Maxxum 700si, Maxxum 7D, Maxxum 807si, Maxxum 9, Maxxum 9000
Leica
DigiLux 2, DigiLux 3, V-Lux, V-Lux 2, V-Lux 3

SPECIFIKACIJE:

Maximum Speed Video mode:
Linear: 39" (100 cm) in 23 seconds
Panning: 360° in 5.0 seconds
Power Supply Input: 110-240VAC, 50/60Hz
Output: 15VDC, 1.5A
For use in: Europe, USA, Canada, Mexico, India, Nigeria, Ghana, Australia, New Zealand, Papua New Guinea, Hong Kong, Singapore, Japan, UAE, South Korea
Battery Lithium-ion 11.1V
Battery Run Time Up to 12 hrs. depending on camera weight
Charging Time 3.0 Hrs.
Connectivity USB x1, Sensor input x1
Head to Tripod Mounting Thread Bottom: 3/8"-16 and 1/4"-20
Top: 3/8"-16
Dimensions 4.0 x 4.0 x 4.0" (102 x 102 x 102 mm)
Weight 3.3 lb (1.5 kg)
Packaging Info
Package Weight 5.5 lb
Box Dimensions (LxWxH) 8.0 x 8.0 x 5.4"

UKLJUČUJE:

Syrp Genie Motion Control Time Lapse Device
Panning Base
Sliding Base
Rope for Slider 9.85' (3.0 m)
2 x Slider Mounts
Multi-voltage Charger