Ikan EC1 Beholder 3-Axis Handheld Gimbal Stabilizer 3-osni stabilizator za DSLR fotoaparate i kamere
ZNAČAJKE:
360° Rotation Along All 3 Axes
32-Bit Controller & 12-Bit Encoder
Adaptive PID Algorithm
Supports Cameras between 2 - 4.5 lb
Three Follow Modes Plus Auto-Inversion
Lock Mode & Auto Point-and-Lock Mode
Quick-Release Baseplate
OLED Display
3/8"-16 Tripod Mount Threaded Hole
1/4"-20 Accessory Mount Threaded Hole
The ikan EC1 Beholder is a 3-axis handheld gimbal stabilizer for DSLR and mirrorless cameras weighing between 2 - 4.5 lb. The EC1 offers unlimited 360° rotation along the yaw, pitch, and roll axes, and features an advanced 32-bit controller and 12-bit encoder system. The gimbal employs an adaptive PID algorithm to deliver stable rotation.
The EC1 offers three follow modes plus an auto-inversion mode that allows for upside down operation. Auto-inversion lets you use the gimbal with dual handle support systems like the ikan DGH. The EC1 also features a lock mode that sets the camera in a fixed position, and a point-and-lock mode that locks the position you hold the camera in for a few seconds. The EC1 also has an OLED display on the rear that confirms the selected mode of operation and provides battery life info.
The EC1 is designed with a quick-release baseplate that allows for convenient camera attachment and tool-less balancing. It also has a 1/4"-20 threaded mounting hole on the handle for attaching accessories for advanced setups, and a 3/8"-16 threaded mounting hole on the bottom for mounting onto a tripod, monopod, and other support gear.
The EC1 runs on three supplied 18650 batteries that provide 8-10 hours of operating life when used continuously, and up to 20 hours when the gimbal is switched between shooting and stand-by modes throughout the day. These batteries are rechargeable from within the EC1 via an included micro USB adapter, and can also be charged using optional chargers such as the ikan ICH-SC4.
Unlimited 360° Rotation
The EC1 Beholder features three 360° rotating brushless motors that give you a limitless range of motion along all three axes: yaw, roll, and pitch.
Advanced Stabilization
Using a 32-bit controller with a 12-bit encoder, the EC1 uses an adaptive PID algorithm to produce a reliably efficient handheld stabilizer.
Lock Mode
In Lock Mode, the Yaw, Pitch, and Roll axes work together to keep the camera fixed and pointed in one direction. The camera's position will stay the same no matter how you move the handle.
Point & Lock
Quickly lock your camera into any position by manually pointing and holding it in any direction. After a few seconds, the camera will lock and hold its position until it is reset back to default.
Multiple Follow Modes
The EC1 features 3 different follow modes. In yaw-axis follow mode, the EC1 will only follow your pan movements. In pitch and yaw-axis follow mode, the EC1 will follow your pan and tilt movements. The 3-axis follow mode gives you full control, allowing you to pan, tilt, and roll.
Auto Inversion
Switch to inverted mode at any time by simply flipping the handle over the camera. Inverted mode can be operated in conjunction with any of the lock and follow modes.
OLED Status Display
A display screen located on the back of the handle conveniently provides you with information on the battery life and operating mode.
Quick-Release Baseplate
Featuring a newly-designed quick-release baseplate system, the EC1 is easy to balance without any tools.
Multiple Mounting Points
The EC1 handle a 1/4"-20 threaded mounting hole for attaching accessories such as a light, microphone, or monitor for advanced setups; and a 3/8"-16 threaded mounting hole on the bottom of the handle for to mount the EC1 on a tripod, jib, or dual handle support system such as the ikan DGH.
SPECIFIKACIJE:
Load Capacity 2 - 4.5 lb (0.9 - 2 kg)
Rotation Range Yaw: 360°
Roll: 360°
Pitch: 360°
Tripod Mount Thread 1 x 3/8"-16
Accessory Mount Thread 1 x 1/4"-20
Battery 3 x 18650 model Li-ion batteries included (3.7 V)
Approx. 8-10 hour operating time when used continuously
Up to 20 hours operating time when switched between shooting and stand-by modes
Approx. 3-4 hours charging time
Operating Temperature 14 to 158°F (-10 to 70°C)
Dimensions 14.2 x 7.24 x 3.1" (36.0 x 18.4 x 7.9 cm)
Weight 2.6 lb (1.2 kg)
Packaging Info
Package Weight 5.25 lb
Box Dimensions (LxWxH) 15.8 x 8.6 x 3.8"
UKLJUČUJE:
ikan EC1 Beholder 3-Axis Handheld Gimbal Stabilizer
Battery Cap with 3/8"-16 Mount
Battery Holder
Micro USB AC Adapter
Quick Release Plate
Travel Case
Travel Case Shoulder Strap
3 x 18650 Battery
Da bi napisali svoje mišljenje o ovom proizvodu potrebno je imati aktivan račun na našim stranicama!
Možete se registrirati kao novi korisnik ili prijaviti kao već postojeći.
Trenutno nema komentara za ovaj proizvod. Budite prvi koji će komentirati!