Sony ECM-W3S mikrofon za fotoaparat

ZNAČAJKE:

For Content Creation, Mobile Journalism
For 1-Person Shoots with Sony Cameras
1 x Transmitter with Built-In Mic
Single-Channel Receiver with MI Shoe
492' Transmission via Bluetooth 5.3
3.5mm TRS and USB-C Ports
Noise Cancellation, Low-Cut Filter
Attenuator Function, LED Indicators
Charging Case, 6-Hour Battery Life

Record single-person interviews and vlogs with your Multi Interface compatible Sony Camera using this Sony ECM-W3S Wireless Microphone System, thanks to its one clip-on transmitter with built-in microphone and single-channel receiver with Multi Interface Shoe connection. The system supports the recording of both analog and digital audio signals in both mixed or separate channels for the ultimate postproduction flexibility. The receiver is ultracompact and has integrated 3.5mm TRS and USB-C output ports. Two switches on the side allow you to select separate or mixed channel recording and toggle between analog and digital output modes. Toggle safety track recording to protect against unforeseen interruptions. An attenuator switch on the transmitter unit prevents clipping.
Bluetooth Wireless Communication
The units communicate with one another via Bluetooth 5.3 low-energy LC3plus codec from up to 492' away. The Bluetooth LC3plus codec ensures low power consumption and low latency while maintaining high sound quality.
Multi Interface Shoe
Use the receiver's integrated Multi Interface Shoe for cable-free connection to your compatible Sony camera. The camera body can supply power to the receiver when attached. Audio is transmitted via direct digital signal for high-quality sound free of transmission deterioration.
Digital Sound Recording
A digital MEMS microphone with a high signal to noise ratio are integrated into the transmitter to capture clear audio with low noise. You can eliminate distortion even further using the built-in noise cut and low-cut filters. The noise cut filter uses digital signal processing to remove interference, while the low-cut filter reduces unwanted low-frequency noise such as wind, air conditioning units, and vibrations.
Clip-On Transmitter

Noise cut filter, low-cut filter
Three attenuation settings: 0, 10, or 20 dB
3.5mm TRS jack for external microphone input

Battery Life

Each component features an integrated lithium-ion battery.
The transmitter can operate for six hours at a time on a full charge.
Use the included charging case to recharge the components when on the go.

Component Design
LED indicators on the receiver and transmitter indicate the communication status and allow you to monitor battery levels. All components are designed to be moisture and dust resistant for outdoor shooting. Included furry windscreens reduce wind noise.

SPECIFIKACIJE:

Wireless Technology
Analog/Digital Hybrid
Included Transmitters
1x Clip-On with Microphone
Diversity
Non-Diversity
Max Operating Range
492.1' / 150 m
Receiver Type
Camera-Mount
Microphone Type
Integrated
Polar Pattern
Omnidirectional
System
Wireless Technology
Analog/Digital Hybrid
Number of RF Channel Frequencies
1
Included Transmitters
1x Clip-On with Microphone
Diversity
Non-Diversity
RF Channel Scanning
Auto-Scan
Max Operating Range
492.1' / 150 m
Max Transmitters per Band
1
Built-In Recorder
No
Timecode Support
No
Mobile App Compatible
No
Bluetooth
5.3
Bluetooth Operating Distance
492.1' / 150 m
Receiver
Receiver Type
Camera-Mount
Mounting Options
Shoe-Mount (with Included Hardware)
Antenna
Internal
Number of Audio Channels
2
Audio I/O
1x 1/8" / 3.5 mm TRS Unbalanced Output
1x Intelligent Hot Shoe Output
Frequency Response
20 Hz to 20 kHz
Network I/O
No
USB/Lightning Connectivity
USB-C Female
Power Requirements
Battery
Battery Type
1x Built-In Rechargeable
Display & Indicators
LED
Operating Temperature
32 to 104°F / 0 to 40°C
Dimensions
1.3 x 1.1 x 2" / 32 x 29 x 50 mm
Weight
0.9 oz / 25 g
Transmitter
Transmitter Type
Clip-On with Microphone
RF Output Power
Not Specified by Manufacturer
Audio I/O
1x 1/8" / 3.5 mm TRS Female Input
Auto-Level Control
Yes
Frequency Response
20 Hz to 20 kHz
Sync Method
Bluetooth
Antenna
Internal
Power Requirements
Battery
Battery Type
1x Built-In Rechargeable
Approx. Battery Life
6 Hour
USB/Lightning I/O
No
Display & Indicators
LED
Operating Temperature
32 to 104°F / 0 to 40°C
Dimensions
1 x 2.1 x 0.8" / 25 x 53.5 x 20.5 mm
Weight
0.6 oz / 17 g
Microphone
Microphone Type
Integrated
Sound Field
Mono
Polar Pattern
Omnidirectional
Frequency Range
20 Hz to 20 kHz
Maximum SPL
120 dB SPL
Sensitivity
-20 dBFS at 1 kHz
Operating Temperature
32 to 104°F / 0 to 40°C
Charging Case
Battery Chemistry
Lithium-Ion
Capacity
Not Specified by Manufacturer
Charging Interface
USB-C
Dimensions
2.7 x 2.6 x 1.6" / 68.5 x 65.5 x 41.5 mm
Weight
3.2 oz / 90 g

UKLJUČUJE:

Sony ECM-W3S Wireless Microphone System with Multi Interface Shoe
Transmitter
Receiver
Charging Case
MI Shoe Cap
Furry Windscreen
Pouch