DJI Upgrade Kit for your DJI A3 Flight Controller! Upgrade Kit to turn your DJI A3 Flight Controllers into the A3 PRO Version.
ATTENTION: Two Upgrade Kits are needed to upgrade the A3 to the A3 PRO.
The A3 can be upgraded to A3 Pro by using two A3 Upgrade Kits. The A3 Pro is equipped with three IMUs and three GNSS units, with additional analytical redundancies for a total of six redundancies. Working together with advanced diagnostic algorithms, if the A3 Pro detects GNSS or IMU unit failure during flight, it seamlessly switches to another unit to maintain reliability and precision.
Safety Features: - Failsafe mode - Low battery level warning (only for DJI Intelligent Flight Battery) - Low battery voltage warning (for other LiPo batteries) - Custom flight altitude and radius limits - No Fly Zones - Motor redundancy (for 6 and 8 rotor platforms) - Motor overload detection - Triple modular redundancy (for A3 Pro)
DJI GO App (DJI Lightbridge 2 required): - Beginner mode - Auto takeoff and landing - Wireless flight controller configuration - Flight data OSD (built-in data recorder) - Intelligent Flight Modes: Course Lock* / Home Lock* / Point of Interest (POI) / Waypoints - *Course Lock and Home Lock work without the DJI Lightbridge 2
Weight: - Flight Controller: 66 g - GPS-Compass Pro: 60 g - LED Module: 15 g - IMU Pro: 40 g - PMU: 45 g
Dimensions:
- Flight Controller: 64mm x 24mm x 19.5mm - GPS-Compass Pro: 61mm (Durchmesser) x 13mm - LED Module: 27mm x 27mm x 8mm - IMU Pro: 34mm x 26.5mm x 20mm - PMU: 51mm x 34mm x 13.5mm
1x GPS 1x IMU 1x Mounting bracket for GPS 1x Screw pack 1x Set of double-sided adhesive tape 3x Cable tie 1x Manual
Da bi napisali svoje mišljenje o ovom proizvodu potrebno je imati aktivan račun na našim stranicama! Možete se registrirati kao novi korisnik ili prijaviti kao već postojeći.